You are here: Home » News » Industry News » choose for the pump?

choose for the pump?

Views:8     Author:Site Editor     Publish Time: 2019-05-14      Origin:Site

1.Note that the type and function of the selected pump meet the requirements of process parameters such as equipment flow, head, pressure, temperature, cavitation flow, and suction stroke.we are slurry pump manufacturer,you can know it.

2.It is necessary to satisfy the requirements of the media characteristics.

For pumps that transport flammable, explosive, toxic or valuable media, it is required to secure the shaft seal or use a non-leakage pump, such as a magnetic drive pump, diaphragm pump, and shield pump. For pumps that transport corrosive media, corrosion resistance is required for convection components. Information, such as AFB stainless steel corrosion-resistant pump, CQF engineering plastic magnetic drive pump; for the pump containing solid particle medium, the convection component is required to use wear-resistant data, if necessary, the shaft seal is flushed with cleaning liquid.

3.High mechanical reliability, low noise and small oscillation.

4.The economic consideration should be based on the lower total cost of equipment, operating, maintenance and management fees.

5. The centrifugal pump has the characteristics of high speed, small volume, light weight, high efficiency, large flow, simple structure, no pulsation of infusion, stable function, easy operation and convenient maintenance.

Therefore, in addition to the following conditions, the centrifugal pump should be used as much as possible:

1.When there is a measurement requirement, the metering pump is selected.

2,the head requirements are very high, the flow is very small and there is no suitable small flow high-lift centrifugal pump can be used, optional reciprocating pump, such as cavitation requirements 2, not high can also choose vortex pump.

3,the head is very low, when the flow is very large, the axial flow pump and the mixed flow pump can be selected.

4.When the viscosity of the medium is large (more than 650~1000mm2/s), consider the choice of rotor pump or reciprocating pump (gear pump, screw pump)

When the medium contains 75% gas, the flow rate is small and the viscosity is less than 37.4mm2/s, a vortex pump can be selected.

5.For occasions with frequent start-up or inconvenient pumping, pumps with self-priming function, such as self-priming centrifugal pump, self-priming vortex pump and pneumatic (electric) diaphragm pump, should be used.

Honesty is the foundation of our business

For customers - credibility, keeping promises, and always maintaining a good corporate image

Service is our eternal theme

We provide our customers with not only advanced technology and quality products, but also a focus on credibility and service-oriented spirit.

Innovation is the source of our development

Be good at learning, learn from others, collect eclecticism, innovate and develop, keep pace with the times, introduce, research and develop the latest technology, so that the company's products have more vitality.

Pursuing excellence is our unremitting goal

Our responsibility to our customers is to provide superior products and services. Maintaining and improving our company's product and service leadership is our primary responsibility.

Hot Products


 Address: Science and Technology Center Building 21 Floor, Huanghe street 136, Shijiazhuang High-tech zones, China
  Contact:Mr. Guo , Ms. Natalia 

  Теl: (+86)-0311 68055336

  Mobile Tel:(+86) 13503312383
                             (+86) 15076113083

Representative abroad:
  Email:
    Tel: +7 920 118-86-60

Contact us
Copyright © Hebei RUISE Mechanical and Technology Co., LTD All Rights Reserved